C613-50100-01 REV C Command Reference for x930 Series 2816
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
NTP COMMANDS
NTP
SERVER
See the following commands for options to configure an NTP server association,
key and NTP version for the server with an IPv6 address of 2001:0db8:010e::2:
awplus# configure terminal
awplus(config)# ntp server 2001:0db8:010e::2
awplus(config)# ntp server 2001:0db8:010e::2 prefer
awplus(config)# ntp server 2001:0db8:010e::2 prefer version 4
awplus(config)# ntp server 2001:0db8:010e::2 prefer version 4
key 1234
awplus(config)# ntp server 2001:0db8:010e::2 version 4 key 1234
awplus(config)# ntp server 2001:0db8:010e::2 version 4
awplus(config)# ntp server 2001:0db8:010e::2 key 1234
To remove an NTP peer association for this peer with an IPv6 address of
2001:0db8:010e::2, use the commands:
awplus# configure terminal
awplus(config)# no ntp server 2001:0db8:010e::2
Related
Commands
ntp peer
ntp source
To Next Page
Loading...
Need help?
General
