C613-50100-01 REV C Command Reference for x930 Series 2824
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
NTP COMMANDS
SHOW
NTP COUNTERS
authentication
failed
The number of NTP packets received that failed authentication.
NTP drops these packets. Packets can only fail authentication if
NTP authentication is enabled with the ntp authenticate
command.
declined The number of packets that were declined for any reason.
restricted The number of NTP packets received that do not match any
restrict statements in the NTP restrictions. NTP drops these
packets. See the command ntp restrict for more information.
rate limited The number of packets dropped because the packet rate
exceeded its limits. See the command ntp discard for more
information.
KoD responses The number of kiss-of-death packets NTP has sent. See the
command ntp restrict for more information.
processed for
time
The number of packets processed by NTP. NTP processes a
packet once it has determined that the packet is valid by
checking factors such as the packet’s authentication, format,
access rights and version.
Table 57-1: Parameters in the output from show ntp counters (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
