Allied Telesis AlliedWare Plus - Page 2890

C613-50100-01 REV C Command Reference for x930 Series 2890
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
LLDP
TLV-SELECT
Examples To include the management-address and system-name TLVs in advertisements
transmitted via ports 1.0.1 and 1.0.6, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# lldp tlv-select management-address
system-name
To include all optional TLVs in advertisements transmitted via ports 1.0.1 and 1.0.6,
use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# lldp tlv-select all
To exclude the management-address and system-name TLVs from advertisements
transmitted via ports 1.0.1 and 1.0.6, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# no lldp tlv-select management-address
system-name
To exclude all optional TLVs from advertisements transmitted via ports 1.0.1 and
1.0.6, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.1,port1.0.6
awplus(config-if)# no lldp tlv-select all
Related
Commands
description (interface)
hostname
lldp med-tlv-select
show lldp interface
show lldp local-info