EasyManuals Logo

Allied Telesis AlliedWare Plus User Manual

Allied Telesis AlliedWare Plus
3082 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2900 background imageLoading...
Page #2900 background image
C613-50100-01 REV C Command Reference for x930 Series 2900
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
LOCATION
COORD-LOCATION CONFIGURATION
altitude is stored as a 30- bit fixed point binary number, with an 8-bit fractional
part. Because the user-entered decimal values are stored as fixed point binary
numbers, they cannot always be represented exactly—the stored binary number
is converted to a decimal number for display in the output of the show location
command. For example, a user-entered latitude value of “2.77” degrees is
displayed as “2.7699999809265136718750000”.
The lat-resolution, long-resolution, and alt-resolution parameters allow the
user to specify the resolution of each coordinate element as the number of valid
bits in the internally-stored binary representation of the value. These resolution
values can be used by emergency services to define a search area.
To specify the coordinate identifier, use the location coord-location identifier
command. To remove coordinate information, delete the coordinate location by
using the no variant of that command. To associate the coordinate location with
particular ports, so that it can be advertised in TLVs from those ports, use the
location elin-location-id command.
Example To configure the location for the White House in Washington DC, which has the
coordinates based on the WGS84 datum of 38.89868 degrees North (with 22 bit
resolution), 77.03723 degrees West (with 22 bit resolution), and 15 meters height
(with 9 bit resolution), use the commands:
awplus# configure terminal
awplus(config)# location coord-location identifier 1
awplus(config-coord)# la-resolution 22
awplus(config-coord)# latitude 38.89868
awplus(config-coord)# lo-resolution 22
awplus(config-coord)# longitude -77.03723
awplus(config-coord)# alt-resolution 9
awplus(config-coord)# altitude 15 meters
awplus(config-coord)# datum wgs84
Related
Commands
location coord-location-id
location coord-location identifier
show lldp local-info
show location

Table of Contents

Other manuals for Allied Telesis AlliedWare Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AlliedWare Plus and is the answer not in the manual?

Allied Telesis AlliedWare Plus Specifications

General IconGeneral
BrandAllied Telesis
ModelAlliedWare Plus
CategorySwitch
LanguageEnglish

Related product manuals