C613-50100-01 REV C Command Reference for x930 Series 2913
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LLDP COMMANDS
SHOW
LLDP LOCAL-INFO
Table 59-1: Parameters in the output of show lldp local-info
Parameter Description
Chassis ID Type Type of the Chassis ID.
Chassis ID Chassis ID that uniquely identifies the local device.
Port ID Type Type of the Port ID.
Port ID Port ID of the local port through which advertisements
are sent.
TTL Number of seconds that the information advertised by
the local port remains valid.
Port Description Port description of the local port, as specified by the
description (interface) command.
System Name System name, as specified by the hostname command.
System Description System description.
System
Capabilities
(Supported)
Capabilities that the local port supports.
System
Capabilities
(Enabled)
Enabled capabilities on the local port.
Management
Addresses
Management address associated with the local port. To
change this, use the lldp management-address
command.
Port VLAN ID (PVID) VLAN identifier associated with untagged or priority
tagged frames received via the local port.
Port & Protocol
VLAN (Supported)
Whether Port & Protocol VLANs (PPV) is supported on
the local port.
Port & Protocol
VLAN (Enabled)
Whether the port is in one or more Port & Protocol
VLANs.
Port & Protocol
VLAN (VIDs)
List of identifiers for Port & Protocol VLANs that the port
is in.
VLAN Names List of VLAN names for VLANs that the local port is
assigned to.
Protocol IDs List of protocols that are accessible through the local
port.
MAC/PHY Auto-
negotiation
Auto-negotiation support and current status of the 802.3
LAN on the local port.
To Next Page
Loading...
Need help?
General
