C613-50100-01 REV C Command Reference for x930 Series 317
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
PLUGGABLES AND CABLING COMMANDS
SHOW
SYSTEM PLUGGABLE
Related
Commands
show system environment
show system pluggable detail
show system pluggable diagnostics
Vendor Name Specifies the vendor’s name for the installed pluggable
transceiver.
Device Name Specifies the device name for the installed pluggable
transceiver.
Device Type Specifies the device type for the installed pluggable
transceiver.
Serial Number Specifies the serial number for the installed pluggable
transceiver.
Manufacturing Datecode Specifies the manufacturing datecode for the installed
pluggable transceiver. Checking the manufacturing
datecode with the vendor may be useful when
determining Laser Diode aging issues.For more
information, see ”How To Troubleshoot Fiber and
Pluggable Issues” in the “Getting Started with AlliedWare
Plus” Feature Overview and Configuration Guide.
SFP Laser Wavelength Specifies the laser wavelength of the installed pluggable
transceiver.
Datecode Specifies the manufacturing datecode for the installed
pluggable transceiver. Checking the manufacturing
datecode with the vendor may be useful when
determining Laser Diode aging issues. For more
information, see ”How To Troubleshoot Fiber and
Pluggable Issues” in the “Getting Started with AlliedWare
Plus” Feature Overview and Configuration Guide.
Device Type Specifies the device type for the installed pluggable
transceiver.
Table 9: Parameters in the output from the show system pluggable command
Parameter Description
To Next Page
Loading...
Need help?
General
