Allied Telesis AlliedWare Plus - Page 371

C613-50100-01 REV C Command Reference for x930 Series 371
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
LOG
HOST (FILTER)
Examples To create a filter to send all messages generated by EPSR that have a severity of
notices or higher to a remote syslog server with IP address 10.32.16.21, use the
following commands:
awplus# configure terminal
awplus(config)# log host 10.32.16.21 level notices program epsr
To create a filter to send all messages containing the text “Bridging initialization”,
to a remote syslog server with IP address 10.32.16.21, use the following
commands:
awplus# configure terminal
awplus(config)# log host 10.32.16.21 msgtext "Bridging
initialization"
To create a filter to send messages with a severity level of informational and
above to the syslog server with IP address 10.32.16.21, use the following
commands:
awplus# configure terminal
awplus(config)# log host 10.32.16.21 level informational
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to a remote syslog server with IP address 10.32.16.21, use the
following commands:
awplus# configure terminal
awplus(config)# no log host 10.32.16.21 level notices program
epsr
To remove a filter that sends all messages containing the text “Bridging
initialization”, to a remote syslog server with IP address 10.32.16.21, use the
following commands:
awplus# configure terminal
awplus(config)# no log host 10.32.16.21 msgtext "Bridging
initialization"
To remove a filter that sends messages with a severity level of informational and
above to the syslog server with IP address 10.32.16.21, use the following
commands:
awplusawpluls# configure terminal
awplus(config)# no log host 10.32.16.21 level informational
Related
Commands
default log host
log host
log host exclude
log host source
log host time
show log config