C613-50100-01 REV C Command Reference for x930 Series 387
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LOGGING COMMANDS
LOG
PERMANENT (FILTER)
Mode Global Configuration
Examples To create a filter to send all messages generated by EPSR that have a severity of
notices or higher to the permanent log use the following commands:
awplus# configure terminal
awplus(config)# log permanent level notices program epsr
To create a filter to send all messages containing the text “Bridging
initialization”, to the permanent log use the following commands:
awplus# configure terminal
awplus(config)# log permanent msgtext Bridging initialization
Related
Commands
clear log permanent
default log permanent
log permanent
log permanent exclude
log permanent size
show log config
show log permanent
To Next Page
Loading...
