Allied Telesis AlliedWare Plus - Page 475

C613-50100-01 REV C Command Reference for x930 Series 475
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
PLATFORM
PORTMODE INTERFACE
Example To change ports 1.1.1 and 1.1.5 into 10Gbps ports on a standalone switch, use the
commands:
awplus# configure terminal
awplus(config)# no stack 1 enable
awplus(config)# platform portmode interface port1.1.1,port1.1.5
10gx4
To return the ports to 40Gbps network switch ports, use the commands:
awplus# configure terminal
awplus(config)# no platform portmode interface
port1.1.1,port1.1.5
To return the ports to stacking ports, use the commands:
awplus# configure terminal
awplus(config)# no platform portmode interface
port1.1.1,port1.1.5
awplus(config)# stack enable expansion-ports
Related
Commands
show platform