C613-50100-01 REV C Command Reference for x930 Series 491
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
SHOW
PLATFORM
Port Mode Whether each port on the AT-StackQS is configured as one
40Gbps port or four 10Gbps ports, if they are operating as
network ports (set with the platform portmode interface
command).
Vlan-stacking TPID The value of the TPID set in the Ethernet type field when a
frame has a double VLAN tag (set with the platform
vlan-stacking-tpid command).
Hardware Filter Size Whether hardware ACLs can filter on IPv6 addresses
(ipv4-full-ipv6) or not (ipv4-limited-ipv6). This is set with
the platform hwfilter-size command.
Table 5: Parameters in the output of the show platform command (cont.)
Parameter Description
To Next Page
Loading...
Need help?
General
