C613-50100-01 REV C Command Reference for x930 Series 494
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
SHOW
PLATFORM PORT
1024 - MaxPktSz Number of packets received and transmitted with
size 1024 octets to the maximum packet length.
1519 - 1522 Number of 1519 - 1522 octet packets received and
transmitted.
1519 - 2047 Number of 1519 - 2047 octet packets received and
transmitted.
2048 - 4095 Number of 2048 - 4095 octet packets received and
transmitted.
4096 - 9216 Number of 4096 - 9216 octet packets received and
transmitted.
General Counters
Receive Counters for traffic received.
Octets Number of octets received.
Pkts Number of packets received.
FCSErrors Number of FCS (Frame Check Sequence) error
events received.
UnicastPkts Number of unicast packets received.
MulticastPkts Number of multicast packets received.
BroadcastPkts Number of broadcast packets received.
PauseMACCtlFrms Number of Pause MAC Control Frames received.
OversizePkts Number of oversize packets received.
Fragments Number of fragments received.
Jabbers Number of jabber frames received.
UnsupportOpcode Number of MAC Control frames with unsupported
opcode received.
AlignmentErrors Receive Alignment Error Frame Counter.
SysErDurCarrier Receive Code Error Counter.
CarrierSenseErr Receive False Carrier Counter.
UndersizePkts Number of undersized packets received.
Transmit Counters for traffic transmitted.
Table 6: Parameters in the output from the show platform port command
Parameter Description
To Next Page
Loading...
Need help?
General
