C613-50100-01 REV C Command Reference for x930 Series 500
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
SPEED
Examples To set an SFP to a fixed speed of 1000Mbps, enter the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.49
awplus(config-if)# speed 1000
To return the port to auto-negotiating its speed, enter the following commands:
awplus# configure terminal
awplus(config)# interface port1.0.49
awplus(config-if)# speed auto
To set the port to auto-negotiate its speed at 1000Mbps only, enter the following
commands:
awplus# configure terminal
awplus(config)# interface port1.0.49
awplus(config-if)# speed auto 1000
Related
Commands
duplex
ecofriendly lpi
polarity
show interface
speed (asyn)
To Next Page
Loading...
