Allied Telesis AlliedWare Plus - Page 507

C613-50100-01 REV C Command Reference for x930 Series 507
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
SWITCHING COMMANDS
THRASH
-LIMITING
To set the thrash limiting action to its default, use the following command:
awplus(config-if)# no thrash-limiting action
To set the thrash limiting timeout to its default, use the following command:
awplus(config-if)# no thrash-limiting timeout
Related
Commands
loop-protection loop-detect
loop-protection action
loop-protection timeout
show loop-protection