C613-50100-01 REV C Command Reference for x930 Series 659
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
LINK AGGREGATION COMMANDS
STATIC
-CHANNEL-GROUP
To reference static channel group 2 as an interface, use the commands:
awplus# configure terminal
awplus(config)# interface sa2
awplus(config-if)#
To make it possible to use QoS Storm Protection on static channel group 2 on
port1.0.6, with an ACL named “test-acl”, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.6
awplus(config-if)# static-channel-group 2 member-filters
awplus(config-if)# access-group test-acl
Related
Commands
show static-channel-group
To Next Page
Loading...
Need help?
General
