C613-50100-01 REV C Command Reference for x930 Series 672
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
POWER OVER ETHERNET COMMANDS
POWER
-INLINE PRIORITY
To reset the priority level to the default of low on port1.0.1 to port1.0.4, use the
following commands:
awplus# configure terminal
awplus(config)# interface port1.0.1-port1.0.4
awplus(config-if)# no power-inline priority
Related
Commands
power-inline usage-threshold
show power-inline
show power-inline interface
show running-config power-inline
To Next Page
Loading...
