C613-50100-01 REV C Command Reference for x930 Series 692
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
GVRP COMMANDS
DEBUG
GVRP
To send debug output for GVRP commands to the console, enter the commands:
awplus# terminal monitor
awplus# configure terminal
awplus(config)# debug gvrp cli
To stop sending debug output for GVRP packets and GVRP commands to the
console, and to stop the display of any debug output on the console, enter the
commands:
awplus# terminal no monitor
awplus# configure terminal
awplus(config)# no debug gvrp all
Related
Commands
show debugging gvrp
terminal monitor
To Next Page
Loading...
Need help?
General
