C613-50100-01 REV C Command Reference for x930 Series 811
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
IPV6 COMMANDS
IPV
6 ADDRESS AUTOCONFIG
To disable SLAAC on the VLAN interface vlan2, use the following commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 address autoconfig
Related
Commands
ipv6 address
ipv6 enable
show ipv6 interface brief
show ipv6 route
show running-config
To Next Page
Loading...
