C613-50100-01 REV C Command Reference for x930 Series 931
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
RIPNG FOR IPV6 COMMANDS
IPV
6 RIP METRIC-OFFSET
Examples To increment the metric-offset on the VLAN interface vlan2, enter the below
commands:
awplus# configure terminal
awplus(config)# router ipv6 rip
awplus(config-router)# exit
awplus(config)# interface vlan2
awplus(config-if)# ipv6 rip metric-offset 1
To reset the metric-offset on the VLAN interface vlan2 to the default value, enter
the below commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# no ipv6 rip metric-offset 1
Validation
Commands
show running-config
Related
Commands
default-metric (IPv6 RIPng)
To Next Page
Loading...
