C613-50100-01 REV C Command Reference for x930 Series 955
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF COMMANDS
AREA
NSSA
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# area 0.0.0.51 nssa
awplus(config-router)# area 3 nssa translator-role candidate
no-redistribution default-information-originate metric 34
metric-type 2
Related
Commands
area default-cost
<role> The role type. Specify one of the following keywords:
always Router always translate NSSA-
LSA to Type-5 LSA.
candidate Router may translate NSSA-LSA
to Type-5 LSA if it is elected.
never Router never translate NSSA-
LSA.
Parameter Description
To Next Page
Loading...
