What to Do Next
To establishing a session with a router if the AAA server is unreachable, use the aaa accounting system
guarantee-first command. This command guarantees system accounting as the first record, which is the
default condition. In some situations, users might be prevented from starting a session on the console or
terminal connection until after the system reloads, which can take more than 3 minutes.
To establish a console or Telnet session with the router if the AAA server is unreachable when the router
reloads, use the no aaa accounting system guarantee-first command.
Verifying Attribute 196
No configuration is required to configure RADIUS Progress Codes. To verify attribute 196 in accounting
“start” and “stop” records, perform the following steps.
SUMMARY STEPS
1.
enable
2.
debug aaa accounting
3.
show radius statistics
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays information on accountable events as they occur.debug aaa accounting
Example:
Device# debug aaa accounting
Step 2
Displays the RADIUS statistics for accounting and
authentication packets.
show radius statistics
Example:
Device# debug aaa authorization
Step 3
Configuring the Switch to Use Vendor-Specific RADIUS Attributes
Follow these steps to configure the switch to use vendor-specific RADIUS attributes:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
935
How to Configure RADIUS
To Next Page
Loading...
Need help?
General
