Cisco Catalyst 2960 Series User Manual

The following table shows the default CoS output queue threshold map when QoS is enabled.
Table 65: Default CoS Output Queue Threshold Map
Queue ID–Threshold ID
CoS Value
2–1
0, 1
3–1
2, 3
4–1
4
1–1
5
4–1
6, 7
The following table shows the default DSCP output queue threshold map when QoS is enabled.
Table 66: Default DSCP Output Queue Threshold Map
Queue ID–Threshold ID
DSCP Value
2–10–15
3–116–31
4–132–39
1–140–47
4–148–63
The following table displays the default egress queue configuration when the 8 egress queue configuration is
enabled using the mls qos srr-queue output queues 8 command.
Table 67: Default 8 Egress Queue Configuration
Queue 8Queue 7Queue 6Queue 5Queue 4Queue 3Queue 2Queue 1Feature
1010101010103010Buffer
allocation
1001001001001001001600100WTD
drop
threshold
1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
566
Information About QoS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000