Cisco Catalyst 2960 Series User Manual

(Optional) Specifies the reaction to be taken for the
specified IP SLAs operation.
Type of IP SLAs reaction--One of the following
keywords can be specified: connectionLoss, icpif,
jitterAvg, jitterDSAvg, jitterSDAvg,
maxOfNegativeDS, maxOfNegativeSD,
maxOfPositiveDS, maxOfPositiveSD, mos,
packetLateArrival, packetLossDS, packetLossSD,
packetMIA, packetOutOfSequence, rtt, timeoutor
verifyError can be specified.
Type of IP SLAs reaction. One of the following
keywords can be specified:
•
connectionLoss
•
icpif
•
jitterAvg
•
jitterDSAvg
•
jitterSDAvg
•
maxOfNegativeDS
•
maxOfNegativeSD
•
maxOfPositiveDS
•
maxOfPositiveSD
•
mos
•
packetLateArrival
•
packetLossDS
•
packetLossSD
•
packetMIA
•
packetOutOfSequence
•
rtt
•
timeout
•
verifyError
reaction_type
(Optional) Specifies the destination IP address of the
destination port for which the IP SLAs events are
monitored.
dest_ip_address
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1901
event_register_ipsla

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000