Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
Exits interface configuration mode and returns to
privileged EXEC mode.
end
Example:
Device(config-if)# end
Step 10
Specifying the Security Violation Mode
When there is a security violation on a port, the port can be shut down or traffic can be restricted. By default,
the port is shut down. You can configure the period of time for which the port is shut down.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface type slot / port
4.
switchport
5.
switchport mode access
6.
authentication port-control auto
7.
mab [eap]
8.
authentication violation {restrict | shutdown}
9.
authentication timer restart seconds
10.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1047
How to Configure MAC Authentication Bypass

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000