Cisco Catalyst 2960 Series User Manual

(Mandatory) Name of the RF progression or status
event. Valid values are:
•
RF_PROG_ACTIVE
•
RF_PROG_ACTIVE_DRAIN
•
RF_PROG_ACTIVE_FAST = 200
•
RF_PROG_ACTIVE_PRECONFIG
•
RF_PROG_ACTIVE_POSTCONFIG
•
RF_PROG_EXTRALOAD
•
RF_PROG_HANDBACK
•
RF_PROG_INITIALIZATION
•
RF_PROG_PLATFORM_SYNC
•
RF_PROG_STANDBY_BULK
•
RF_PROG_STANDBY_COLD
•
RF_PROG_STANDBY_CONFIG
•
RF_PROG_STANDBY_FILESYS
•
RF_PROG_STANDBY_HOT
•
RF_PROG_STANDBY_OIR_SYNC_DONE
•
RF_REGISTRATION_STATUS
•
RF_STATUS_MAINTENANCE_ENABLE
•
RF_STATUS_MANUAL_SWACT
•
RF_STATUS_OPER_REDUNDANCY_MODE_CHANGE
•
RF_STATUS_PEER_COMM
•
RF_STATUS_PEER_PRESENCE
•
RF_STATUS_REDUNDANCY_MODE_CHANGE
•
RF_STATUS_SWACT_INHIBIT
event
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1925
event_register_rf

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000