Cisco Catalyst 2960 Series User Manual

•
During upload operations, if you are overwriting an existing file (including an empty file, if you had to
create one) on the server, ensure that the permissions on the file are set correctly. Permissions on the
file should be world-write.
Downloading an Image File By Using TFTP
You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP server
and overwrite the existing image. To keep the current image, go to Step 3.
SUMMARY STEPS
1.
2.
3.
archive download-sw/overwrite/reload tftp:[[//location]/directory]/image-name.tar
4.
archive download-sw/leave-old-sw/reload tftp:[[//location]/directory]/image-name.tar
DETAILED STEPS
PurposeCommand or Action
Copy the image to the appropriate TFTP directory on the workstation. Make
sure that the TFTP server is properly configured.
Step 1
Log into the switch through the console port or a Telnet session.
Step 2
Download the image file from the TFTP server to the switch, and overwrite the
current image.
archive download-sw/overwrite/reload
tftp:[[//location]/directory]/image-name.tar
Step 3
•
The /overwrite option overwrites the software image in flash memory
with the downloaded image.
•
The /reload option reloads the system after downloading the image unless
the configuration has been changed and not been saved.
•
For // location , specify the IP address of the TFTP server.
•
For /directory/image-name.tar specify the directory (optional) and the
image to download. Directory and image names are case sensitive.
Download the image file from the TFTP server to the switch, and keep the
current image.
archive download-sw/leave-old-sw/reload
tftp:[[//location]/directory]/image-name.tar
Step 4
•
The /leave-old-sw option keeps the old software version after a download.
•
The /reload option reloads the system after downloading the image unless
the configuration has been changed and not been saved.
•
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar specify the directory (optional) and the
image to download. Directory and image names are case sensitive.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2067
Copying Image Files Using TFTP

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000