EasyManuals Logo

Cisco Catalyst 2960 Series User Manual

Cisco Catalyst 2960 Series
2288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1631 background imageLoading...
Page #1631 background image
PurposeCommand or Action
Example:
Switch> enable
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Specifies the recipient of the trap message.
snmp-server host host-addr {traps | informs}
{version {1 | 2c | 3}} community-string
notification-type
Step 3
host-addrSpecifies the name or address of the NMS.
Example:
Switch(config)# snmp-server host
traps (the default)Sends SNMP traps to the host.
informsSends SNMP informs to the host.
versionSpecifies the SNMP version to support. Version
1, the default, is not available with informs.
172.20.10.10 traps private
mac-notification
community-stringSpecifies the string to send with the
notification operation. You can set this string by using the
snmp-server host command, but we recommend that you
define this string by using the snmp-server community
command before using the snmp-server host command.
notification-typeUses the mac-notification keyword.
Enables MAC threshold notification traps to the NMS.snmp-server enable traps mac-notification
threshold
Step 4
Example:
Switch(config)# snmp-server enable traps
mac-notification threshold
Enables the MAC address threshold notification feature.mac address-table notification threshold
Example:
Switch(config)# mac address-table
Step 5
notification threshold
Enters the threshold value for the MAC address threshold usage
monitoring.
mac address-table notification threshold [limit
percentage] | [interval time]
Step 6
Example:
Switch(config)# mac address-table
(Optional) limit percentageSpecifies the percentage of
the MAC address table use; valid values are from 1 to 100
percent. The default is 50 percent.
notification threshold interval 123
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1549
How to Administer the Switch

Table of Contents

Other manuals for Cisco Catalyst 2960 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 2960 Series and is the answer not in the manual?

Cisco Catalyst 2960 Series Specifications

General IconGeneral
LayerLayer 2
Power over Ethernet (PoE)Available on some models
RAM128 MB
Flash Memory32 MB
MAC Address Table Size8000
Operating Temperature0°C to 45°C (32 to 113°F)
Ports24 or 48 x 10/100/1000

Related product manuals