Cisco Catalyst 2960 Series User Manual

SUMMARY STEPS
1.
enable
2.
show aaa common-criteria policy name policy-name
3.
show aaa common-criteria policy all
DETAILED STEPS
Step 1
enable
Enables privileged EXEC mode.
Example:
Device> enable
Step 2
show aaa common-criteria policy name policy-name
Displays the password security policy information for a specific policy.
Example:
Device# show aaa common-criteria policy name policy1
Policy name: policy1
Minimum length: 1
Maximum length: 64
Upper Count: 20
Lower Count: 20
Numeric Count: 5
Special Count: 2
Number of character changes 4
Valid forever. User tied to this policy will not expire.
Step 3
show aaa common-criteria policy all
Displays password security policy information for all the configured policies.
Example:
Device# show aaa common-criteria policy all
====================================================================
Policy name: policy1
Minimum length: 1
Maximum length: 64
Upper Count: 20
Lower Count: 20
Numeric Count: 5
Special Count: 2
Number of character changes 4
Valid forever. User tied to this policy will not expire.
====================================================================
Policy name: policy2
Minimum length: 1
Maximum length: 34
Upper Count: 10
Lower Count: 5
Numeric Count: 4
Special Count: 2
Number of character changes 2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1058
How to Configure Password Strength and Management for Common Criteria

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000