Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesnononoSets the load
threshold for
the caller at
which
additional
links are
either added
to or deleted
from the
multilink
bundle. If the
load goes
above the
specified
value,
additional
links are
added. If the
load goes
below the
specified
value, links
are deleted.
Used with
service=ppp
and
protocol=multilink.
The range
for <n> is
from 1 to
255.
load-threshold=
<n>
yesyesnononononoAllows the
user profile
to reference
information
configured in
a map class
of the same
name on the
network
access server
that dials
out. Used
with the
service=outbound
and
protocol=ip.
map-class
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
796
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000