Cisco Catalyst 2960 Series User Manual

!
end
Additional References
The following sections provide references related to writing EEM policies Using the Cisco IOS CLI.
Related Documents
Document TitleRelated Topic
Cisco IOS Master Commands List, All ReleasesCisco IOS commands
Cisco IOS Embedded Event Manager Command
Reference
EEM commands: complete command syntax, defaults,
command mode, command history, usage guidelines,
and examples
Embedded Event Manager Overview moduleEmbedded Event Manager overview
Writing Embedded Event Manager Policies Using
Tcl module
Embedded Event Manager policy writing using Tcl
Configuring Enhanced Object Tracking moduleConfiguring enhanced object tracking
Standards
TitleStandard
--No new or modified standards are supported, and
support for existing standards has not been modified.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
CISCO-EMBEDDED-EVENT-MGR-MIB
RFCs
TitleRFC
--
No new or modified RFCs are supported, and support
for existing RFCs has not been modified.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1844
Additional References

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000