Cisco Catalyst 2960 Series User Manual

(Mandatory) OID number of data element in SNMP
dot notation (for example, 1.3.6.1.2.1.2.1.0). The
types of OIDs allowed are:
•
COUNTER_TYPE
•
COUNTER_64_TYPE
•
GAUGE_TYPE
•
INTEGER_TYPE
•
OCTET_PRIM_TYPE
•
OPAQUE_PRIM_TYPE
•
TIME_TICKS_TYPE
oid
(Mandatory) Entry comparison operator used to
compare the current OID data value with the entry
value; if true, an event will be raised and event
monitoring will be disabled until exit criteria are met.
entry_op
(Mandatory) Type of SNMP get operation that needs
to be applied to the OID specified. If the get_type
argument is "exact," the value of the specified OID
is retrieved; if the get_type argument is "next," the
value of the lexicographical successor to the specified
OID is retrieved.
get_type
(Mandatory) Value with which the current oid data
value should be compared to decide if the SNMP
event should be raised.
entry_val
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1934
event_register_snmp

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000