SUMMARY STEPS
1.
enable
2.
show event manager environment [all| variable-name]
3.
configure terminal
4.
event manager environment variable-name string
5.
Repeat Registering and Defining an EEM Tcl Script to configure all the environment variables required
by the policy to be registered in Registering and Defining an EEM Tcl Script.
6.
event manager policy policy-filename [type {system| user}] [trap]
7.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
(Optional) Displays the name and value of EEM environment
variables.
show event manager environment [all|
variable-name]
Step 2
Example:
Device# show event manager environment all
•
The optional all keyword displays all the EEM environment
variables.
•
The optional variable-nameargument displays information
about the specified environment variable.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 3
Configures the value of the specified EEM environment variable.
event manager environment variable-name string
Step 4
Example:
Device(config)# event manager environment
_cron_entry 0-59/2 0-23/1 * * 0-6
•
In this example, the software assigns a CRON timer
environment variable to be set to the second minute of every
hour of every day.
--Repeat Registering and Defining an EEM Tcl Script
to configure all the environment variables required
Step 5
by the policy to be registered in Registering and
Defining an EEM Tcl Script.
Registers the EEM policy to be run when the specified event
defined within the policy occurs.
event manager policy policy-filename [type
{system| user}] [trap]
Step 6
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1772
How to Write Embedded Event Manager Policies Using Tcl
To Next Page
Loading...
Need help?
General
