Cisco Catalyst 2960 Series User Manual

DescriptionEnvironment Variable
OIR Event Detector
A value of 1 indicates an insertion event; a value of
2 indicates a removal event.
_oir_event
The slot number for the OIR event._oir_slot
Resource Event Detector
The configured ERM threshold._resource_configured_threshold
The current value reported by ERM._resource_current_value
The ERM dampen time, in nanoseconds._resource_dampen_time
The ERM event direction. The event direction can be
one of the following: up, down, or no change.
_resource_direction
The ERM event level. The four event levels are
normal, minor, major, and critical.
_resource_level
The ERM notify data flag._resource_notify_data_flag
The ERM resource owner ID._resource_owner_id
The ERM policy ID._resource_policy_id
The ERM policy violation flag; either false or true._resource_policy_violation_flag
The ERM event time, in nanoseconds._resource_time_sent
The ERM resource user ID._resource_user_id
RF Event Detector
A value of 0 indicates that this is not an RF event; a
value of 1 indicates an RF event.
_rf_event
RPC Event Detector
A value of 0 indicates that there is no error; a value
of 1 to 83 indicates error.
_rpc_event
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1690
Information About Writing EEM Policies Using the Cisco IOS CLI

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000