Cisco Catalyst 2960 Series User Manual

Number of occurrences before an event is raised; if
this argument is not specified, an event is raised on
the first occurrence.
occurs
Number of occurrences must occur within this number
of POSIX timer units in order to raise event; if this
argument is not specified, it does not apply.
period_sec period_msec
Regular expression used to perform CLI command
pattern matching.
pattern
Set _cerrno
Yes
sys_reqinfo_cli_history
Queries the history of command-line interface (CLI) commands.
Syntax
sys_reqinfo_cli_history
Arguments
None
Result String
rec_list {{CLI history string 0}, {CLI history str 1},...}
Where each CLI history string is:
time_sec %ld time_msec %ld cmd {%s}
Marks the start of the CLI command history list.rec_list
Time when the CLI command was run.time_sec time_msec
Text of the CLI command.cmd
Set _cerrno
Yes
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1997
sys_reqinfo_cli_history

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000