Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesnononoIdentifies a
Windows
NT server
that can be
requested by
Microsoft
PPP clients
from the
network
access server
during IPCP
negotiation.
To be used
with
service=ppp
and
protocol=ip.
The IP
address
identifying
each
Windows
NT server is
entered in
dotted
decimal
format.
wins-servers=
yesyesyesyesyesyesyesA numeric
zonelist
value. Used
with
service=arap.
Specifies an
AppleTalk
zonelist for
ARA (for
example,
zonelist=5).
zonelist=x
See Configuring TACACS+. module for the documents used to configure TACACS+, and TACACS+
authentication and authorization.
TACACS Accounting AV Pairs
The following table lists and describes the supported TACACS+ accounting AV pairs and specifies the Cisco
IOS release in which they are implemented.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
816
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000