Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesyesyesyesnonononoPPP
Challenge
Handshake
Authentication
Protocol
(CHAP)
authentication
failed. This
code
concerns
PPP
connections.
1043 - PPP
CHAP Fail
yesyesyesyesnonononoAuthentication
failed from
the remote
server. This
code
concerns
PPP
sessions.
1044 - PPP
Remote
Fail
yesyesyesyesnonononoThe peer
sent a PPP
termination
request.
This code
concerns
PPP
connections.
1045 - PPP
Receive
Term
yesyesyesyesnonononoLCP got a
close
request
from the
upper layer
while LCP
was in an
open state.
This code
concerns
PPP
connections.
PPP LCP
Close
(1046)
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
839
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000