Cisco Catalyst 2960 Series User Manual

event detector is available. The event detectors shown in the table are supported in later releases of the same
Cisco IOS release train. For more details on each event detector, see the Event Detectors concept in the
“Embedded Event Manager Overview” module.
Table 155: Availability of Event Detectors by Cisco IOS Release
15 E
XE 3E
15.1(2)SY15.0(1)M
15.1(3)T
12.4(22)T
12.2(33)SRE
12.4(20)T
12.2(33)SXI
12.2(33)SXH12.2(18)SXF4
Cisco
IOS
Software
Modularity
12.4(2)T
12.2(31)SB3
12.2(33)SRB
12.3(14)T
12.2(18)SXF5
12.2(28)SB
12.2(33)SRA
12.2(25)SEvent
Detector
YesYesYesYesYesYesYesYesYesYesApplication-Specific
Yes--YesYesYesYesYesYesYes--CLI
YesYesYesYesYesYesYesYesYesYesCounter
----YesYes------------Custom
CLI
----YesYesYesYes--Yes----Enhanced
Object
Tracking
Yes------------------Environmental
Yes--YesYesYesYesYes------GOLD
YesYesYes--------------Identity
Yes--YesYesYesYesYesYesYesYesInterface
Counter
Yes--YesYes------------IPSLA
YesYesYes--------------Mac-Address-Table
YesYesYes--------------Neighbor
Discovery
----YesYes------------NF
YesYesYesYesYesYesYesYesYes--None
YesYesYesYesYesYesYesYesYes--OIR
----YesYesYesYesYesYes----Resource
Yes--YesYesYesYesYesYes----RF
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1668
Information About Embedded Event Manager

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000