Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
Specifies the
name of a
local pool
from which
to get the
address of
the remote
host. Used
with
service=ppp
and
protocol=ip.
Note that
addr-pool
works in
conjunction
with local
pooling. It
specifies the
name of a
local pool
(which must
be
preconfigured
on the
network
access
server). Use
the ip-local
pool
command to
declare local
pools. For
example:
ip
address-pool
local
ip local pool
boo 10.0.0.1
10.0.0.10
ip local pool
moo 10.0.0.1
10.0.0.20
You can then
use
TACACS+
to return
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
782
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000