DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
PPP name authentication.
To apply for PAP, do not
configure the ppp pap
sent-name password
command on the interface.
For PAP,
“preauth:send-name” and
“preauth:send-secret” will
be used as the PAP
username and PAP
password for outbound
authentication. For CHAP,
“preauth:send-name” will
be used not only for
outbound authentication,
but also for inbound
authentication. For a
CHAP inbound case, the
NAS will use the name
defined in
“preauth:send-name” in the
challenge packet to the
caller box.
The send-name
attribute has
changed over
time: Initially, it
performed the
functions now
provided by both
the send-name and
remote-name
attributes. Because
the remote-name
attribute has been
added, the
send-name
attribute is
restricted to its
current behavior.
Note
send-name1926
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
915
Information about RADIUS
To Next Page
Loading...
