Event_reqinfo
"event_ID %u event_type %u event_pub_sec %u event_pub_msec %u event_severity %u" "group_name %u
operation_id %u condition %u reaction_type %u dest_ip_addr %u" "threshold_rising %u threshold_falling%u
measured_threshold_value %u" "threshold_count1 %u threshold count2 %u"
DescriptionEvent Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
The type of event to monitor for the create, update,
and delete flow.
event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
The severity of the event.event_severity
The name of theIPSLA group.group_name
The IPSLA operation ID.operation_id
The condition of IPSLA, which can be one of the
following:
•
cleared
•
occurred
condition
The IPSLA reaction type.reaction_type
The IPSLA destination IP address.dest_ip_address
The IPSLA configured rising threshold value.threshold rising
The IPSLA configured falling threshold value.threshold falling
The measured threshold value of the IPSLA operation.measured_threshold_value
Corresponds to the argument of the threshold type1.threshold_count1
Corresponds to the argument of the threshold type2.threshold_count2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1903
event_register_ipsla
To Next Page
Loading...
Need help?
General
