Cisco Catalyst 2960 Series User Manual

DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
Specifies additional vendor
specific attribute (VSA)
information for NAS-Port
accounting. To specify
additional NAS-Port
information in the form an
Attribute-Value Pair
(AVPair) string, use the
radius-server vsa send
global configuration
command.
This VSA is
typically used in
Accounting, but
may also be used
in Authentication
(Access-Request)
packets.
Note
Cisco-NAS-Port2926
Sets the minimum number
of links for MLP.
min-links1926
Allows users to configure
the downloadable user
profiles (dynamic ACLs)
by using the authentication
proxy feature so that users
can have the configured
authorization to permit
traffic going through the
configured interfaces.
proxyacl#<n>1926
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
917
Information about RADIUS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000