Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesnononoSpecifies the
reason a
connection
was taken
off-line. The
Disconnect-Cause
attribute is
sent in
accounting-stop
records. This
attribute also
causes stop
records to be
generated
without first
generating
start records
if
disconnection
occurs
before
authentication
is performed.
Refer to the
following
table
(Disconnect
Cause
Extensions)
for a list of
Disconnect-Cause
values and
their
meanings.
disc-cause
yesyesyesyesnononoExtends the
disc-cause
attribute to
support
vendor-specific
reasons why
a connection
was taken
off-line.
disc-cause-ext
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
819
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000