Cisco Catalyst 2960 Series User Manual

Result String
None
Set _cerrno
No
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} %u card %u sub_card %u"
"event_severity {%s} event_pub_sec %u event_pub_msec %u overall_result %u"
"new_failure {%s} action_notify {%s} tt %u tc %u bl %u ci %u pc %u cn {%s}"
"sn {%s} tn# {%s} ta# %s ec# {%s} rc# %u lf# {%s} tf# %u cf# %u tr# {%s}"
"tr#p# {%s} tr#d# {%s}"
DescriptionEvent Type
Action notify information in GOLD event: true or
false.
action_notify
The boot-up diagnostic level, which can be one of the
following values:
•
0: complete diagnostic
•
1: minimal diagnostics
•
2: bypass diagnostic
bl
Card information for the GOLD event.card
Consecutive failure, where testnum is the test number.
For example, cf3 is the EEM built-in environment
variable for consecutive failure of test 3.
cf testnum
Card index.ci
Card name.cn
Test error code, where testnum is the test number. For
example, ec3 is the EEM built-in environment
variable for the error code of test 3.
ec testnum
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
The time, in milliseconds and seconds, when the event
was published to the EEM.
event_pub_msec event_pub_sec
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1884
event_register_gold

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000