Cisco Catalyst 2960 Series User Manual

DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
PPP password
authentication. The
vendor-specific attributes
(VSAs)
“preauth:send-name” and
“preauth:send-secret” will
be used as the PAP
username and PAP
password for outbound
authentication. For a
CHAP outbound case, both
“preauth:send-name” and
“preauth:send-secret” will
be used in the response
packet.
send-secret1926
Provides the name of the
remote host for use in
large-scale dial-out. Dialer
checks that the large-scale
dial-out remote name
matches the authenticated
name, to protect against
accidental user RADIUS
misconfiguration. (For
example, dialing a valid
phone number but
connecting to the wrong
device.)
remote-name1926
Miscellaneous Attributes
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
916
Information about RADIUS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000