Cisco Catalyst 2960 Series User Manual

event_register_ioswdsysmon
Registers for an IOSWDSysMon event. Use this Tcl command extension to generate an event when a Cisco
IOS task exceeds specific CPU utilization or memory thresholds. A Cisco IOS task is called a Cisco IOS
process in native Cisco IOS.
Syntax
event_register_ioswdsysmon [tag ?] [timewin ?] [sub12op and|or] [sub1 ?] [sub2 ?]
[queue_priority low|normal|high|last] [maxrun ?] [nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
(Optional) Defines the time window within which all
of the subevents must occur in order for an event to
be generated (specified in SSSSSSSSSS[.MMM]
format, where SSSSSSSSSS must be an integer
representing seconds between 0 and 4294967295,
inclusive, and where MMM must be an integer
representing milliseconds between 0 and 999).
timewin
(Optional) The combination operator for comparison
between subevent 1 and subevent 2.
sub12_op
(Optional) The subevent 1 specification.sub1
(Optional) The subevent 2 specification.sub2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1896
event_register_ioswdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000