Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 5
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 7
Start the Cisco IOS CNS agent on the switch.
Step 8
What to Do Next
You can now use the Cisco Configuration Engine to remotely send incremental configurations to the switch.
Related Topics
Cisco IOS CNS Agents, on page 412
Enabling an Initial Configuration for Cisco IOS CNS Agent
Follow these steps to enable the CNS configuration agent and initiate an initial configuration on the switch.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
418
How to Configure the Configuration Engine

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000