Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config-if)# end
Step 4
Verifies your entries.
show mls qos interface [interface-id] queueing
Example:
Switch# show mls qos interface
Step 5
interface_id queueing
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Step 6
Example:
Switch# copy-running-config
To return to the default setting, use the no srr-queue
bandwidth limit interface configuration command.
startup-config
Related Topics
Queueing and Scheduling on Egress Queues
Examples: Configuring Egress Queue Characteristics, on page 640
Monitoring Standard QoS
Table 73: Commands for Monitoring Standard QoS on the Switch
DescriptionCommand
Displays QoS class maps, which define the match
criteria to classify traffic.
show class-map [class-map-name]
Displays global QoS configuration information.show mls qos
Displays the aggregate policer configuration.show mls qos aggregate-policer
[aggregate-policer-name]
Displays QoS information at the port level, including
the buffer allocation, which ports have configured
policers, the queueing strategy, and the ingress and
egress statistics.
show mls qos interface [interface-id] [buffers |
policers | queueing | statistics]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
630
Monitoring Standard QoS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000