Cisco Catalyst 2960 Series

action_syslog msg "context_save succeeded"
}
Example 1: Retrieve
If var is unspecified, retrieves multiple variables from the context.
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if {[catch {foreach {var value} [context_retrieve TESTCTX] {set $var $value}} errmsg]} {
action_syslog msg "context_retrieve failed: $errmsg"
} else {
action_syslog msg "context_retrieve succeeded"
}
if {[info exists testvara]} {
action_syslog msg "testvara exists and is $testvara"
} else {
action_syslog msg "testvara does not exist"
}
if {[info exists testvarb]} {
action_syslog msg "testvarb exists and is $testvarb"
} else {
action_syslog msg "testvarb does not exist"
}
if {[info exists testvarc]} {
action_syslog msg "testvarc exists and is $testvarc"
} else {
action_syslog msg "testvarc does not exist"
}
Example 2: Save
If var is specified, saves the value of var.
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
set testvar 123
if {[catch {context_save TESTCTX testvar} errmsg]} {
action_syslog msg "context_save failed: $errmsg"
} else {
action_syslog msg "context_save succeeded"
}
Example 2: Retrieve
If var is specified and index_if_array is not specified, or if index_if_array is specified but var is a scalar
variable, retrieves the value of var.
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if {[catch {set testvar [context_retrieve TESTCTX testvar]} errmsg]} {
action_syslog msg "context_retrieve failed: $errmsg"
} else {
action_syslog msg "context_retrieve succeeded"
}
if {[info exists testvar]} {
action_syslog msg "testvar exists and is $testvar"
} else {
action_syslog msg "testvar does not exist"
}
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1866
context_save