Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
Example:
Switch(config-flow-monitor)# cache timeout active
15000
Returns to privileged EXEC mode.end
Example:
Switch(config-flow-monitor)# end
Step 7
(Optional) Displays information about NetFlow flow
monitors.
show flow monitor [name record-name]
Example:
Switch show flow monitor name MonitorTest
Step 8
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Switch# copy running-config
Step 9
startup-config
What to Do Next
Apply the flow monitor to a Layer 2 interface, Layer 3 interface, or VLAN.
Related Topics
Monitors
Example: Configuring a Flow, on page 534
Creating a Sampler
You can create a sampler to define the NetFlow sampling rate for a flow.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
527
How to Configure NetFlow Lite

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000