Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
yesnononononononoThis code
is used to
report a
protocol
error event
only when
no other
code in the
protocol
error class
applies.
This code
applies to
ISDN or
modem
calls that
have come
in over
ISDN.
1911 -
Q850
Protocol
Error
yesnononononononoThere has
been an
error when
interworking
with a
network
that does
not provide
codes for
actions that
it takes.
This code
applies to
ISDN or
modem
calls that
have come
in over
ISDN.
1927 -
Q850
Unspecified
Internetworking
Event
Configuring AAA Server Group Selection Based on DNIS
Cisco software allows you to authenticate users to a particular AAA server group based on the Dialed Number
Identification Service (DNIS) number of the session. Any phone line (a regular home phone or a commercial
T1/PRI line) can be associated with several phone numbers. The DNIS number identifies the number that was
called to reach you.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
880
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000