Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesyesyesyesA shell
(EXEC)
command.
This
indicates the
command
name for a
shell
command
that is to be
run. This
attribute
must be
specified if
service
equals
“shell.” A
NULL value
indicates that
the shell
itself is
being
referred to.
This
TACACS+
AV
pair
cannot
be used
with
RADIUS
attribute
26.
Note
cmd=x
yesyesnononononoUsed with
the
service=outbound
and
protocol=ip.
data-service
yesyesnononononoDefines the
number to
dial. Used
with the
service=outbound
and
protocol=ip.
dial-number
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
786
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000